 Home Calendar Speedsters Event-Photos Engines Technical Construction John-Blacks-#917 WoodCars Model-A-Chassis 5-Speed Brakes DriveLine Engine Flywheel Front-End Radiator Rear-End Steering Speedster-Design Survey Planking CNCRouter Model Strongback Strip-Building Bodies Heads Carbs Water-Pumps HighPerformance RearEnd-Tranny Front-Ends Wire-Wheels Engines All-Vintage-Ford Clubs-Museums Racing Hill-Climbs Endurance-Runs GreatAmericanRace Historics Automobilia Organization ContactUs |
Flywheel |
|
The stock Model A Ford Flywheel with ring gear and pilot
bearing weighs 64 pounds.
This heavy Flywheel and the 29.5" diameter tires were necessary in the 30's to pull the cars through chuck holes. This is not needed with modern roads. Lighter flywheels mean faster acceleration... a quicker, more responsive car. Several suppliers offer lighter flywheels from 35 to 50 pounds. I chose a 41 pound flywheel. |
|
|
Home || Calendar || Speedsters || Events || Engines || Technical || Historics || Organization || Contact Us |
|
|
Copyright 2002 and succeeding years -- Northwest Vintage Speedsters |
|
|
Suggestions or Comments on Our Web Site ? |
|