Home
Calendar
Speedsters
Event-Photos
Engines
Technical
   Construction
     John-Blacks-#917
        WoodCars
        Model-A-Chassis
        Speedster-Design
        Survey
        Planking
        CNCRouter
        Model
        Strongback
        Strip-Building
          Orca Boat Shop
          The Stem
          Bottom
          Coat1
          Coat2
          Coat3
          Starting
          MidWay
          Complete
          Sand
          Problems
          PreGlass
          Glassing
          Epoxy
          Sand Inside
          Glassin
          Hood
          Fender
          Fitting
          Structure
   Bodies
   Heads
   Carbs
   Water-Pumps
   HighPerformance
   RearEnd-Tranny
   Front-Ends
   Wire-Wheels
   Engines
   All-Vintage-Ford
   Clubs-Museums
   Racing
   Hill-Climbs
   Endurance-Runs
   GreatAmericanRace
Historics
Automobilia
Organization
ContactUs

Glassing

it took a team of 3 to epoxy the body.  During the first day we were able to apply 2 coats. The next day we sanded, applied another coat, and taped the stem areas where the fiberglass did not overlap. 

 

Home  ||  Calendar  ||  Speedsters  ||  Events  ||  Engines  ||  Technical  ||  Historics  ||  Organization  ||  Contact Us

Copyright 2002 and succeeding years -- Northwest Vintage Speedsters

Suggestions or Comments on Our Web Site ?
Contact : WebMaster at nwvs.org