 Home Calendar Speedsters Event-Photos Engines Technical Construction John-Blacks-#917 WoodCars Model-A-Chassis Speedster-Design Survey Planking CNCRouter Model Strongback Strip-Building Orca Boat Shop The Stem Bottom Coat1 Coat2 Coat3 Starting MidWay Complete Sand Problems PreGlass Glassing Epoxy Sand Inside Glassin Hood Fender Fitting Structure Bodies Heads Carbs Water-Pumps HighPerformance RearEnd-Tranny Front-Ends Wire-Wheels Engines All-Vintage-Ford Clubs-Museums Racing Hill-Climbs Endurance-Runs GreatAmericanRace Historics Automobilia Organization ContactUs |
|
|
Orca Boats |
|
|
|
|
|
|
|
Orca Boats in Port Moody, BC, is where I built all the strip built parts. Rod Tait sells Canoe and Kayak plans, teaches classes on strip building, and helps people build canoes or kayaks. I knew that if I tried to build the body myself, I'd have to build it several times before I got an acceptable product. Building it here with Rod's help let me be successful the first time. It was a pleasure building the body in his shop. |
|
|
|
|
|
Home || Calendar || Speedsters || Events || Engines || Technical || Historics || Organization || Contact Us |
|
|
Copyright 2002 and succeeding years -- Northwest Vintage Speedsters |
|
|
Suggestions or Comments on Our Web Site ? |
|
